Categories

Topenergy Launches GD-PV16 16-String PV Combiner Box to Optimize DC-side Efficiency for Solar Projects

IP65 outdoor-rated solar combiner box delivers centralized protection and simplified wiring for utility-scale farms and commercial rooftop PV systems
Oct 13th,2026 1 Views

As global installed photovoltaic capacity continues rapid growth, solar EPC contractors and system integrators face persistent pressure to cut DC-side wiring costs, improve field reliability and streamline maintenance. To address these needs, Topenergy today officially launches the GD-PV16 16-string PV combiner box – a heavy-duty DC convergence and protection solution built for both utility-scale ground-mounted solar farms and commercial rooftop PV systems.

Engineered to aggregate DC power from up to 16 solar array strings into a single output feed to the central inverter, this new Topenergy PV combiner box replaces scattered on-site protection components with a single, standardized enclosure. By centralizing string-level protection and convergence, it reduces DC cabling volume by up to 40%, cuts installation labor, and creates a clear, maintainable DC electrical architecture for solar projects of all sizes.

Streamlined DC Convergence for Utility-Scale Solar Farms

For large ground-mounted solar plants, distributed string wiring and inconsistent protection are major drivers of cost and downtime. The Topenergy GD-PV16 PV combiner box solves this by consolidating multiple PV array strings at the array level, delivering combined DC power to the central inverter through a single feeder cable.

As illustrated below, each PV combiner box collects current from parallel solar strings, provides per-string overcurrent protection, and feeds a unified DC output downstream. This scalable layout allows EPC teams to deploy combiner banks across large solar farms, reducing long cable runs and minimizing power loss.

“On large solar farm projects, every meter of DC cable adds material cost and installation time,” said the Product Manager at Topenergy. “Our 16-string PV combiner box maximizes convergence capacity per enclosure, so project teams use fewer units, run fewer cables back to the inverter room, and deliver projects faster and at lower total cost.”

Compact Wall-Mounted Design for Commercial Rooftop Deployments

For commercial and industrial rooftop solar projects, space efficiency and outdoor durability are critical. The Topenergy GD-PV16 features a space-saving wall-mounted structure with an IP65-rated cold-rolled steel enclosure, making it suitable for direct exterior wall installation without additional weatherproof shelter.

The diagram below shows a typical rooftop application: rooftop PV strings feed into the wall-mounted PV combiner box, which integrates SPD surge protection and DC isolation before supplying power to the string inverter. The compact footprint and pre-drilled mounting brackets allow fast installation on factory walls, warehouse facades and rooftop support structures.

All cable entry points are fitted with waterproof cable glands, and the door frame includes a full perimeter sealing strip to maintain IP65 dust and water ingress protection. This makes the unit suitable for coastal, high-humidity and dusty industrial environments, with an operating temperature range from -25°C to +60°C.

Layered Protection & Service-Friendly Build for Reduced Downtime

Reliability and maintainability are top priorities for solar plant operators. The Topenergy GD-PV16 photovoltaic combiner box is built with a three-layer DC protection system: independent string fuses, a main DC circuit breaker, and a surge protection device (SPD). This layered architecture protects both the solar array and downstream inverter from overcurrent, short-circuit faults and lightning-induced surges.

As shown in the maintenance scene below, all internal components are mounted on standard DIN rails with clearly numbered terminals. The modular design allows technicians to visually inspect fuse status and replace surge modules without removing main wiring, significantly reducing troubleshooting time and system downtime.

“Maintenance efficiency directly impacts plant uptime and ROI,” added the Product Manager. “We designed this combiner box so field teams can inspect, test and replace components quickly and safely. Every protective element is easily accessible, and all wiring follows international color-coding standards for error-free servicing.”

The entire product is designed and manufactured in compliance with IEC 62548 and IEC 60364 standards, making it suitable for cross-border solar EPC projects worldwide.

Key Specifications at a Glance

Parameter Specification
Brand Topenergy
Model GD-PV16
Product Type 16-String PV Combiner Box
Rated DC Voltage DC 1000V
Rated Current Per String 15A
Protection Functions String fuses, DC circuit breaker, SPD surge protection, PE grounding
Enclosure Rating IP65
Mounting Wall-mounted / pole-mounted
Standards IEC 62548, IEC 60364




Availability & Customization

The Topenergy GD-PV16 PV combiner box is available now for sample orders and bulk project deliveries worldwide.

  • Sample orders: 1 unit available for testing, shipped in 3–5 working days
  • Bulk orders: 15–20 working day lead time, with tiered volume pricing
  • Customization: Configurable string count (4/8/12/16), current rating, component brands and private labeling for distributors and EPC partners

About Topenergy

Topenergy is a professional manufacturer of solar DC distribution and protection equipment, specializing in high-quality PV combiner boxes, grid-connected distribution boxes and balance-of-system solutions for global solar projects.